Dynamix DW 4 FXO Guia do Utilizador descarregar pdf (Página 70)

following picture. See Figure 8. For example: Set static IP address

192.168.23.23 on Device Setting

Figure 8.

Step 2: Go to VOIP Setting



SIP to select the “Accept Proxy Only”

feature to NO and make sure to setup the SIP Local Port number to 8080.

See Figure 9.

Figure 9.

Step 3: Set the FXO SIP line’s information to each line.

each line by selecting Line ID from 1 to 4. See Figure 10. Enable Hotline

feature by selecting Incoming Call Handling to Hot Line and give remote

FXO SIP port 1 number 1001 hotline to remote FXS port 1 number 501

directly.

Dynamix 2540 (FXO Gateway) configuration

Step 1: set static IP address to Dynamix 2540 FXO gateway’s WAN port as



Network of Dynamix 2540 WEB page.

Go to FXO Setting webpage of

Dynamix 2540 FXO Gateway and configure

Dynamix 2504 FXS gateway port 1 number to 501. For example:

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

Sem comentários

Dynamix DW 4 FXO Guia do Utilizador Página 70